Product Details
Specifications

Aluminium Expansion Joints, Floor to Wall 25 mm Off set

Price Starting From

₹ 0.00

Product Specifications

Usage/Application: Construction

Material: Galvanized Iron

Size: 12” / 300 mm

HSN CODE: 7308

Unit: RMT

Ready Made Lintel: Lintel made out of 3mm thick Galvanized Iron, perforated as per Arpitha

Uses/Application: Industrial

Country of Origin: Made in India

Purpose

Main purpose of the product is to replace conventional RCC lintels for ease of installation, time, and cost saving during construction.

Advantages

Shuttering not required.
Reinforcement not required.
Water curing not required.
Very simple installation; requires a few minutes for installation and brickwork construction above the lintel can be started immediately.
Can be used for all types and kinds of door and window openings of various wall thicknesses.

Availability & Specification

Available in various lengths and widths suitable for 100mm, 150mm, and 200mm thick walls and also available in custom-made widths.

Specification: 12'' inch's / 300 mm

Lintel Installation Guidelines

1. Positioning:

Place the lintel above the opening, fully covered in cement.
Make sure the walls on both sides of the opening are level.

2. Mortar Application:

Put a layer of cement on top of the lintel.
Continue laying blocks as usual.

3. Bracket Use:

If there's a column on one side and a wall on the other, use a bracket that fits.
Secure the bracket with 3-4 anchor bolts (8 mm wide, 100 mm long).

4. Lintel Support:

Put one end of the lintel on the bracket and the other end on the wall.
Apply cement on the lintel and keep laying blocks.

5. Jack Support:

For spans longer than 1 meter, use a support (jack) under the lintel.
Complete the first two rows of blocks on the first day.
Repeat this on the second and third days.

6. Ongoing Work:

From the fourth day, work can continue without interruptions.
Take away the jack after the 5th day.

7. Span Considerations:

Spans over 2.25 meters will need at least one welded joint.
For spans over 2 meters, secure the lintel to the roof with 10 mm rods and anchor bolts every 1.5 meters.
Make sure the anchor bolts are set into the wall when finished.

Build More, Achieve More™

Need Help? Call us at: +91 8217869982