FR 302, 20 kg with stop control, 350 mm

• Carrying capacity of 20 kg, suitable for moderate load drawers.

• Built-in Stop Control: helps in smoother closing and prevents the drawer from sliding out too far. 

• Part-extension design with one-sided captive guide rail (mounts on side) for simpler installation. 

• “Automatic tolerance compensation ±1 mm” – meaning small misalignments or slight manufacturing differences won’t spoil the slide’s movement. 

• Powder-coated steel finish (usually white) for durability and good look in furniture. 

• Detachable without tools (on some lengths) – making drawer removal for servicing or cleaning easier. 

• Minimum cabinet body depth required is nominal length + a few millimetres (so for 350 mm length you’ll need at least ~353 mm depth) to fit correctly.

Caution- For efficiency and durability

• Do not apply paint or polish.

• Don’t put more than 20 kg weight on the drawer.

• The drawer does not open fully — it’s a part-extension type.

• Make sure the cabinet depth is enough (at least 353 mm) for proper fitting.

• Fix the slides straight and even on both sides for smooth movement.

• Keep the slides clean and dust-free for best performance.

• Use the correct screws to avoid loosening.