It is a slim sensor unit that you mount on the surface (rather than drilling into the furniture) and use as either an IR motion detector or a door-contact switch. It blends into modern interiors with its aluminium look, and is great for controlling lighting in furniture, wardrobes or display areas without visible bulky switches. It works with Halemeier’s smart switch systems, triggering lights when a door opens or movement is detected.

It is a compact sensor designed to control lighting automatically. It can function as an infrared (IR) motion detector or a door contact switch, turning lights on when a door opens or when movement is detected. Its surface-mounted design allows easy installation on cabinets, furniture, or display units without drilling. The sleek black finish blends seamlessly into modern interiors, offering convenient hands-free lighting control for wardrobes, furniture, or display areas.

The MultiSwitch² Master is a compact control unit designed for 12 V DC LED lighting systems, supporting up to 36 W of load. It acts as the “brain” of a system that connects multiple sensors (e.g., door‑contacts or IR sensors) and then drives the lights accordingly. Ideal for furniture or display lighting, it enables wireless‑like control (via sensors) without complex rewiring.

The MultiSwitch² Master unit for 230‑240 V AC is a control module designed to automate lighting systems. It connects to the mains (230‑240 V AC) and supports up to 500 W of load. Via this unit you can attach multiple sensors (e.g., door‑contacts, IR sensors) to trigger lighting without traditional switches. It includes a 3‑metre supply cable with Euro plug and a 150 mm jack connection for sensors.

It’s a 3‑metre long extension lead (sensor cable) for use with the MultiSwitch² controller system. It allows you to mount your sensor (IR or contact switch) farther away from the control unit, giving you flexibility in installation (e.g., inside furniture, wardrobe or cabinetry). It’s designed for the corresponding voltage versions of the system (12 V DC, 24 V DC or 230 V AC) and is compatible as an accessory to extend reach.

The MultiSwitch² PIR sensor (surface‑mounted, aluminium look) is a compact motion detector made by Halemeier, designed to automatically switch lighting on when it detects movement or heat in furniture, closets or display cabinets where traditional sensors may not fit. It connects to the MultiSwitch² master unit and responds to motion up to about 2 metres away with a detection angle of ~120°.

This motion sensor is designed to mount on the surface of furniture or display units and automatically turn lights on when it detects movement. It comes in a sleek black finish, making it discreet and suitable for modern interiors. With a detection range of about 2 meters and a coverage angle of around 120°, it’s ideal for indoor areas like wardrobes, cabinets or rooms where you want hands‑free lighting control.

This compact control unit is designed for 12 V DC LED lighting setups and can handle a maximum load of 36 watts. It acts as the hub for the MultiSwitch² sensor system, allowing you to connect up to 1‑4 sensors (such as IR motion sensors or door‑contact switches). When a sensor detects an event (like a door opening or motion), the master unit triggers the lights accordingly—offering automatic, almost seamless control of your lighting.

This is a 3‑metre (3000 mm) extension cable designed to connect a MultiSwitch² PIR motion sensor (or compatible sensor) to the MultiSwitch² master unit. It gives you more flexibility in positioning your sensor farther away from the master controller—ideal when you want to mount the motion sensor in a wardrobe, display cabinet or other furniture while keeping the control unit hidden.

It’s a mains‑voltage control module designed for automatic lighting systems. You plug it into your 230‑240 V AC supply (via a Euro‑plug and 3 m cable) and connect it to sensors (door contact, motion or IR sensors). When a sensor is triggered, the Master unit switches lighting loads of up to 500 W. It’s ideal for furniture, display lighting or any setup where you want sensors to control lights without separate switches.

The Repeater is an accessory unit designed for 12 V DC LED lighting systems when the load exceeds the standard limit of 36 W. It connects in between the control unit and the lights (or alongside the system) and lets you increase the number of lights you can control without changing your main setup. It works with Halemeier’s LED dimmers or switch systems and helps distribute control signal to larger lighting groups.

This is a small, discreet infrared or door‑contact switch designed for 12 V DC LED lighting systems with a maximum load of 36 W. It is made to be drilled into furniture or cabinets (requires about an 8 mm hole) so that the sensor sits flush and unobtrusive. When the door opens or someone approaches, the sensor detects the movement/contact and can trigger lights or other devices. It comes with an M1 lead (typically 1 m long) for easy wiring.

The DC 12 V‑24 V PIR Motion Sensor Switch (equivalent type under the “12 V DC, max 36 W, Lead M1, drill‑in” category) is a compact infrared motion detection unit designed for 12 V DC lighting systems. It fits neatly into furniture or cabinets via a small drilled‑hole installation, and detects movement or presence to automatically switch LED lights on and off. With a max output of around 36 W, it’s ideal for low‑voltage LED lighting in wardrobes, display cases or under‑cabinet lighting, giving you convenient hands‑free control without complex wiring.

The Hettich CargoTech M Plain Wire Basket is a high-quality, multi-purpose storage solution designed for modern kitchens. It measures 386 mm (W) × 500 mm (D) × 100 mm (H) and is ideally suited for cabinets with an external width of 450 mm.

A durable, chrome-plated plain wire basket designed for 500 mm cabinet depth and 450 mm cabinet width. Measuring 386 × 500 × 150 mm (15” × 20” × 6”), it provides spacious and organized storage for kitchen cabinets. Ideal for storing utensils, jars, towels, and daily-use items with smooth accessibility and a clean, modern look.

CargoTech Plain Wire Basket (386 × 500 × 200 mm) — For 450 mm Cabinet Width A strong and spacious chrome-plated wire basket designed for 500 mm cabinet depth and 450 mm cabinet width. With dimensions 386 × 500 × 200 mm (15” × 20” × 8”), it offers extra height for storing bulkier kitchen items like bottles, containers, jars, and packets. Its sturdy open-wire construction ensures durability, ventilation, and easy access—perfect for modern modular kitchen cabinets.

A strong and spacious chrome-plated wire basket designed for 500 mm cabinet depth and 450 mm cabinet width. With dimensions 386 × 500 × 200 mm (15” × 20” × 8”), it offers extra height for storing bulkier kitchen items like bottles, containers, jars, and packets. Its sturdy open-wire construction ensures durability, ventilation, and easy access—perfect for modern modular kitchen cabinets.

A durable chrome-plated wire basket designed for 500 mm cabinet depth and 500 mm cabinet width. Measuring 436 × 500 × 100 mm (17” × 20” × 4”), it provides shallow, organized storage for kitchen utensils, cutlery, trays, or small containers. Its sturdy open-wire design ensures easy access, ventilation, and a clean, modern look in modular kitchen cabinets.

A sturdy chrome-plated wire basket designed for 500 mm cabinet depth and 500 mm cabinet width. Measuring 436 × 500 × 150 mm (17” × 20” × 6”), it offers medium-height storage for kitchen items such as jars, bottles, utensils, and containers. Its durable open-wire design provides ventilation, easy cleaning, and a modern look for modular kitchen cabinets.

A robust chrome-plated wire basket designed for 500 mm cabinet depth and 500 mm cabinet width. Measuring 436 × 500 × 200 mm (17” × 20” × 8”), it provides tall, spacious storage for bulkier kitchen items such as bottles, jars, containers, and pantry essentials. Its sturdy open-wire construction ensures proper ventilation, easy cleaning, and a modern look suitable for modular kitchen cabinets.