It’s a 3‑metre long extension lead (sensor cable) for use with the MultiSwitch² controller system. It allows you to mount your sensor (IR or contact switch) farther away from the control unit, giving you flexibility in installation (e.g., inside furniture, wardrobe or cabinetry). It’s designed for the corresponding voltage versions of the system (12 V DC, 24 V DC or 230 V AC) and is compatible as an accessory to extend reach.

The MultiSwitch² PIR sensor (surface‑mounted, aluminium look) is a compact motion detector made by Halemeier, designed to automatically switch lighting on when it detects movement or heat in furniture, closets or display cabinets where traditional sensors may not fit. It connects to the MultiSwitch² master unit and responds to motion up to about 2 metres away with a detection angle of ~120°.

This motion sensor is designed to mount on the surface of furniture or display units and automatically turn lights on when it detects movement. It comes in a sleek black finish, making it discreet and suitable for modern interiors. With a detection range of about 2 meters and a coverage angle of around 120°, it’s ideal for indoor areas like wardrobes, cabinets or rooms where you want hands‑free lighting control.

This compact control unit is designed for 12 V DC LED lighting setups and can handle a maximum load of 36 watts. It acts as the hub for the MultiSwitch² sensor system, allowing you to connect up to 1‑4 sensors (such as IR motion sensors or door‑contact switches). When a sensor detects an event (like a door opening or motion), the master unit triggers the lights accordingly—offering automatic, almost seamless control of your lighting.

This is a 3‑metre (3000 mm) extension cable designed to connect a MultiSwitch² PIR motion sensor (or compatible sensor) to the MultiSwitch² master unit. It gives you more flexibility in positioning your sensor farther away from the master controller—ideal when you want to mount the motion sensor in a wardrobe, display cabinet or other furniture while keeping the control unit hidden.

It’s a mains‑voltage control module designed for automatic lighting systems. You plug it into your 230‑240 V AC supply (via a Euro‑plug and 3 m cable) and connect it to sensors (door contact, motion or IR sensors). When a sensor is triggered, the Master unit switches lighting loads of up to 500 W. It’s ideal for furniture, display lighting or any setup where you want sensors to control lights without separate switches.