The Intermat 9935 TH22/L hinge is a quality concealed hinge designed for thicker doors ranging from 26 to 43 mm. It provides a 95° opening angle and uses a Base 8 mounting with a +5° crank, allowing precise alignment and smooth operation. Supplied with a D 0 mm mounting plate, this hinge ensures a neat, flush fit and a premium soft-close movement option when used with compatible accessories. Ideal for cabinets, wardrobes, and premium furniture requiring sturdy and reliable hinges.

The Hettich Intermat 9935 TH22/L hinge is a concealed-cup hinge engineered for “thick door” cabinetry usage. This specific variant uses a Base –3 mounting plate combined with a 16° crank, creating a fixed repositioning of the door relative to the cabinet frame or adjacent doors. It offers a 95° opening angle and comes with a mounting plate of D 0 mm (i.e., no additional offset). It’s suitable for doors in the ~26–43 mm thickness range (manufacturer listing shows 16–43 mm, so check your door thickness).

It is a wide-angle concealed hinge made for 16–24 mm thick doors. It allows the door to open up to 165°, giving full access to the cabinet interior. The hinge uses a Base 12.5 (Crank 0°) setup with a standard Intermat mounting plate (D 0 mm) for a flat and neat fit. It’s ideal for cabinets where a wide opening and a clean, modern look are needed, such as kitchen or wardrobe furniture.

This hinge is designed for corner cabinets with folding doors. It uses the TH-52 cup format and is suited for doors about 16-21 mm thick. It offers an opening angle of 50° or 65°, and comes with a mounting plate (D 0 mm type) in the Intermat system. The hinge has an overlay mounting (door sits over the cabinet frame) and does not include a self-closing mechanism.

It is a concealed hinge specially designed for corner unit folding doors. It is suitable for 16–21 mm thick doors and offers a 50° or 65° opening angle, allowing smooth folding door movement. The hinge uses a D 0 mm Intermat mounting plate for standard installation and features a cup in Intermat design for a clean, durable, and modern look. Ideal for kitchen corner cabinets or wardrobe corner units where two doors fold together neatly.

This is a long LED handle/light strip that’s 867 mm in length. It’s built from stainless steel and is designed to work with 12 V DC power, drawing up to 8.2 watts. It provides gentle, efficient light while also serving as a modern and functional furniture or cabinet handle.

The HandleLine i MW² Stainless Steel, 1167 mm is a long LED handle light designed for modern furniture and tall cabinets. It runs on 12V DC power and uses up to 11.1 watts. The light gives bright, adjustable MultiWhite (warm to cool white) illumination and has a sleek stainless steel finish. It serves as both a handle and decorative light, adding style, comfort, and visibility to furniture.

The HandleLine i MW² in Black Opal finish is a sleek LED handle light, 867 mm long. It offers bright and even illumination for furniture, operates on 12 VDC, and consumes 8.2 watts of power for efficient lighting performance.

The Lite Pipe is a 1000 mm long LED light with an aluminium body and warm white illumination. It operates on 12 VDC power and uses only 5.0 watts, providing soft, even lighting ideal for furniture or display applications.

The Lite Pipe in aluminium finish is a 1200 mm long LED light that gives warm white illumination. It runs on 12 VDC power and uses 5.5 watts, providing soft, even, and energy-efficient lighting for furniture or display areas.

The Lite Pipe in aluminium finish is a 1000 mm long LED light with neutral white illumination. It operates on 12 VDC power and uses 5.0 watts, offering bright, natural, and energy-efficient lighting for furniture or display applications.

The Lite Pipe in aluminium finish is a 1200 mm long LED light with neutral white illumination. It runs on 12 VDC power and uses 5.5 watts, providing bright, natural, and energy-efficient lighting suitable for furniture, wardrobes, or display areas.

It is a wireless wall-mounted switch used to control smart lighting or other Zigbee-compatible devices. It comes with a mounting ring, making it easy to install on walls for a neat and permanent setup. The remote connects through Zigbee technology, allowing you to turn lights on or off and adjust brightness if the connected receiver supports dimming. It is designed for one channel, meaning it can control one group or device at a time.

It is a compact wireless receiver designed to work with the X-Mitter Smart remote control system. It allows you to switch or dim 12V DC LED lights or other low-voltage devices wirelessly. With a maximum output of 36 watts, it is ideal for controlling LED strips, cabinet lights, or other small lighting applications. The receiver connects to a 12V DC power supply and pairs easily with compatible Zigbee or X-Mitter remotes, offering convenient control without extra wiring.

The X-Mitter Extension Set 12VDC includes a Smart Receiver (max. 36W) and a 60W electronic ballast designed for wireless control of 12V LED lighting systems. It works together with the X-Mitter Smart remote, allowing you to switch or dim lights without direct wiring. The receiver manages the connection between the power supply and lighting, while the ballast ensures stable and efficient power for the LEDs.

It is a wireless lighting control system that includes a 5-channel smart remote control and a Smart Receiver with a maximum output of 36 watts. It is designed for 12V DC LED lighting, allowing you to control up to five different lighting zones or groups from one remote. The system enables easy on/off switching and dimming without complex wiring. It uses reliable wireless communication, making it ideal for furniture lighting, display units, or interior applications where multiple lights need to be controlled independently.

It is a wireless device designed to operate 12V DC LED lighting systems easily and conveniently. It allows you to switch lights on or off and adjust brightness levels without the need for direct wiring. The remote supports multiple channels, enabling control of several lighting zones or groups from a single controller. Compact and stylish, it provides smooth operation and reliable performance, making it ideal for modern homes,

It is a compact wireless control unit designed for 12V DC LED lighting systems. It connects between the power supply and the LED lights, allowing wireless control through an S-Mitter Smart Remote. The receiver supports up to 36 watts of total load and enables smooth on/off switching and dimming of connected lights. It is easy to install and ideal for furniture, display, or interior lighting setups where you want flexible, wire-free control and reliable performance.

The S-Mitter Extension Set 12VDC includes a Smart Receiver (max. 36W) and a 60W ballast, designed to extend or expand an existing S-Mitter Smart lighting setup. It allows wireless control of 12V DC LED lights when paired with an S-Mitter Smart Remote. The receiver connects between the power supply and the LED lights, while the ballast ensures a stable and efficient power output.

It is a wireless lighting control system that includes a 4-channel remote control and a Smart Receiver with a maximum load of 4×36 watts. It is designed for 12V DC LED lighting setups, allowing you to manage up to four separate lighting zones or groups independently. The system supports on/off switching and dimming for each channel, providing flexible and convenient control without complex wiring. Easy to install and operate, the 4-Mitter Smart Set is ideal for modern furniture, display.